哈尔滨PLC模块西门子交换机供应
单相, 24 V DC/ 5 A (SITOP PSU100S)单相电源适用普通应用；符合 EU directive 94/9/EC (ATEX 100a)；超薄型设计，在 45℃ 时具有 50 % 额外功率可保持 5 秒钟和 120 % 额定功率。
Power supply, type
5 A
Order No.
6EP1 333-2AA01
6EP1 333-2BA01
Input
1-phase AC
Rated voltage Uin rated
120/230 V AC
Set by means of selector switch on device
Voltage range
85 ... 132 V/170 ... 264 V
Overvoltage strength
2.3 x Uin rated, 1.3 ms
Mains buffering at Iout rated
> 20 ms at Uin = 93/187 V
Rated line frequency; rated line frequency range
50/60 Hz; 47 ... 63 Hz
Rated current Iin rated
2.1/1.15 A
Switch-on current limit (+25 °C)
< 32 A, typ. 3 ms
I 2 t
< 0.8 A2s
Built-in incoming fuse
T A/250 V (not accessible)
Recommended miniature circuit breaker (IEC 898) in the mains power input
From 6 A, C characteristic
Output
Controlled, isolated DC voltage
Rated voltage Uout rated
24 V DC
Total tolerance
±3 %
Static line smoothing
Approx. 0.1%
Approx. 0.1%
Static load smoothing
Approx. 0.5%
Approx. 0.5%
Residual ripple
< 150 mVpp (typ. 50 mVpp)
Spikes (bandwidth: 20 MHz)
< 240 mVpp (typ. 150 mVpp)
Adjustment range
22.8 ... 28.0 V
Status indicator
24 V OK = green LED
On/Off behavior
Overshoot of Uout approx. 4%
Startup delay/voltage rise
< 0.1 s at 230 V AC/typ. 50 ms
Rated current Iout rated
5 A
Current range
Up to +60°C
0 ... 5 A
0 ... 5 A
Derating
0 ... 6 A (up to 45°C)
0 ... 6 A (up to 45°C)
Dynamic overcurrent on
Power-up on short-circuit
Typ. 17 A for 100 ms
Typ. 17 A for 100 ms
Short-circuit during operation
Typ. 17 A for 200 ms
Typ. 17 A for 200 ms
Parallel switching for enhanced performance
Yes, 2 units
Efficiency
Efficiency at Uout rated,Iout rated
Approx. 87%
Power loss at Uout rated,Iout rated
Approx. 17 W
Closed-loop control
Dyn. mains compensation
(Uin rated ±15%)
Typ. ±0.3 % Uout
Typ. ±0.3% Uout
Dynamic load smoothing
(Iout: 50/100/50 %)
Typ. ±1% Uout
Load step settling time
50 to
Typ. 0.2 ms
Typ. 0.2 ms
100 to 50%
Protection and monitoring
Output overvoltage protection
< 33 V
Current limitation
Typ. 6.4 ... 6.6 A, overload capability 150% Iout rated up to 5 s/min
Short-circuit protection
Constant current characteristic
Sustained short-circuit current rms value
Approx. 10 A
Overload/short-circuit indicator
-
Safety
Primary/secondary isolation
Yes, safety extra low output voltage Uout according to EN 60950-1 and EN 50178
Safety class
Class I
Leakage current
< 3.5 mA (typ. 0.4 mA)
Safety test
Yes; CB scheme
CE marking
Yes
UL/cUL (CSA) approval
cULus-listed (UL 508, CSA C22.2 No. 107.1), File E197259, cCSAus (CSA C22.2 No. 60950-1, UL 60950-1)
Protection against explosion
ATEX EX II 3G Ex nA II T4;
UL 1604 Class I Div. 2 Group A, B, C, D
FM approval
Marine approval
GL
Degree of protection (EN 60529)
IP20
EMC
Emitted interference
EN 55022 Class B
Supply harmonics limitation
EN 61000-3-2
Noise immunity
EN 61000-6-2
Operating data
Ambient temperature range
0 ... +60°C with natural convection
Transport and storage temperature range
?40 ... +85°C
-40 ... +85°C
Humidity class
Climate class 3K3 according to EN 60721, no condensation
Mechanics
Connections
Supply input L, N, PE
One screw-type terminal each for 0.5 ... 2.5 mm2 solid/finely stranded
One screw-type terminal each for 0.5 ... 2.5 mm2solid/finely stranded
Output +
2 screw-type terminals for 0.5 ... 2.5 mm2
2 screw-type terminals for 0.5 ... 2.5 mm2
Output -
Dimensions (W x H x D) in mm
50 x 125 x 125
Weight, approx.
0.5 kg
Mounting
Can be snapped onto standard mounting rail EN 60715 35x7.5/15
Accessories
6EP1 333-2BA20
西门子交换机模块，西门子电源模块代理商，西门子逻辑控制模块 。西门子触摸屏授权总代理商，西门子触摸屏授权一级代理商，西门子模块授权一级代理商，西门子CPU模块一级代理商
哈尔滨PLC模块西门子交换机供应 哈尔滨PLC模块西门子交换机供应